New energy vehicle T6 aluminum water cooling plate

A water-cooled (liquid-cooled) heat dissipation system must have the following components: water-cooled blocks, circulating fluid, water pumps, pipes and water tanks or heat exchangers. The water-cooled block is a metal block with a water channel inside. It is made of copper or aluminum. It is in contact with the CPU and will absorb the heat of the CPU. Therefore, the function of this part is the same as that of the air-cooled heat sink. The difference is It is that the water-cooled block must have a water channel through which the circulating fluid passes and is completely sealed, so as to ensure that the circulating fluid does not leak and cause a short circuit of the electrical appliance. The function of circulating fluid is similar to that of air, but it can absorb a lot of heat and keep the temperature unchanged. If the fluid is water, it is a well-known water cooling system. The function of the water pump is to push the circulating fluid to flow, so that the fluid that has absorbed the heat of the CPU will flow out of the water cooling block on the CPU, and the new low-temperature circulating fluid will continue to absorb the heat of the CPU. The water pipe connects the water pump, the water cooling block and the water tank, and its function is to allow the circulating fluid to circulate in a closed channel without leakage, so that the liquid cooling system can work normally.

4. Mechnical Properties